Fence Cost Calculator / Delaware
Fence Cost in Delaware (2026)
Building a fence in Delaware runs roughly 10% above the national average on installed labor, which we apply to the per-foot rate. With a frost line around 30 in, posts are set deeper (more concrete) than in warm-winter states. Last updated July 1, 2026.
A typical 150 ft wood privacy fence in Delaware
6 ft wood, one walk gate, flat terrain, normal soil — a clean baseline before you customize.
Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.
Material takeoff
- Posts
- 24 ea
- Panels / sections
- 19 ea
- Concrete (80 lb bags)
- 53 bags
Cost breakdown
- Fence run
- $3k – $7k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $3k – $9k
- Model estimate
- $5,850
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (30 in) with a 2 ft minimum embed.
- Most Delaware towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Posts should be set below the local frost line.
Where these numbers come from: installed-price surveys + regional references, updated July 1, 2026 — see our methodology.
What drives fence cost in Delaware
Delaware splits north and south: clay soils and suburban permitting up around Wilmington, sandy easy-digging ground and beach-town wind exposure down in Sussex County. The 30-inch frost line calls for mid-depth footings, and coastal hardware should be rated for salt air. Vinyl sells especially well in the beach communities where low maintenance wins. Labor comes in around 10 percent over the national benchmark — mid-Atlantic pricing without the big-metro spike of its neighbors.
Estimate your fence in Delaware
$5k – $12k · $39 per linear foot (/lf)
Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.
Material takeoff
- Posts
- 30 ea
- Panels / sections
- 25 ea
- Concrete (80 lb bags)
- 66 bags
Cost breakdown
- Fence run
- $4k – $10k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $5k – $12k
- Model estimate
- $7,665
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (30 in) with a 2 ft minimum embed.
- Most Delaware towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Posts should be set below the local frost line.
Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources
Frequently asked questions
- How much does a fence cost in Delaware?
- A typical 150 ft, 6 ft wood privacy fence in Delaware runs about $3k – $9k installed, with labor roughly 10% above the national average.
- How deep do fence posts go in Delaware?
- Delaware's frost line is about 30 in, so post holes are dug to roughly 3 ft to set below frost — deeper frost means more concrete per post.
- Do I need a permit for a fence in Delaware?
- Most Delaware towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Posts should be set below the local frost line.