Fence Cost Calculator / Maryland
Fence Cost in Maryland (2026)
Building a fence in Maryland runs roughly 15% above the national average on installed labor, which we apply to the per-foot rate. With a frost line around 30 in, posts are set deeper (more concrete) than in warm-winter states. Last updated July 1, 2026.
A typical 150 ft wood privacy fence in Maryland
6 ft wood, one walk gate, flat terrain, normal soil — a clean baseline before you customize.
Material takeoff
- Posts
- 24 ea
- Panels / sections
- 19 ea
- Concrete (80 lb bags)
- 53 bags
Cost breakdown
- Fence run
- $3k – $7k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $4k – $9k
- Most likely
- $6,116
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (30 in) with a 2 ft minimum embed.
- Montgomery and Prince George's County require permits and HOA review; historic districts limit materials.
Where these numbers come from: installed-price surveys + regional references, updated July 1, 2026 — see our methodology.
What drives fence cost in Maryland
Maryland is HOA country — planned communities from Columbia to the DC suburbs mean architectural review is often the longest step, not the build. The 30-inch frost line calls for proper footings, and humid Chesapeake summers push many buyers from wood to vinyl or aluminum. Historic districts in Annapolis and older towns restrict material and style. Labor prices about 15 percent above the national average, pulled up by the Washington and Baltimore metros, with the Eastern Shore noticeably cheaper.
Estimate your fence in Maryland
$5k – $12k · $41 per linear foot (/lf)
Material takeoff
- Posts
- 30 ea
- Panels / sections
- 25 ea
- Concrete (80 lb bags)
- 66 bags
Cost breakdown
- Fence run
- $4k – $10k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $5k – $12k
- Most likely
- $8,013
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (30 in) with a 2 ft minimum embed.
- Montgomery and Prince George's County require permits and HOA review; historic districts limit materials.
Data: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · industry surveys — see all sources
Frequently asked questions
- How much does a fence cost in Maryland?
- A typical 150 ft, 6 ft wood privacy fence in Maryland runs about $4k – $9k installed, with labor roughly 15% above the national average.
- How deep do fence posts go in Maryland?
- Maryland's frost line is about 30 in, so post holes are dug to roughly 3 ft to set below frost — deeper frost means more concrete per post.
- Do I need a permit for a fence in Maryland?
- Montgomery and Prince George's County require permits and HOA review; historic districts limit materials.