Fence Cost Calculator / Oregon
Fence Cost in Oregon (2026)
Building a fence in Oregon runs roughly 18% above the national average on installed labor, which we apply to the per-foot rate. With a frost line around 12 in, posts are set deeper (more concrete) than in warm-winter states. Last updated July 1, 2026.
A typical 150 ft wood privacy fence in Oregon
6 ft wood, one walk gate, flat terrain, normal soil — a clean baseline before you customize.
Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.
Material takeoff
- Posts
- 24 ea
- Panels / sections
- 19 ea
- Concrete (80 lb bags)
- 35 bags
Cost breakdown
- Fence run
- $3k – $7k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $4k – $10k
- Model estimate
- $6,275
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (12 in) with a 2 ft minimum embed.
- Most Oregon towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Coastal wind exposure calls for sturdier posts and footings.
Where these numbers come from: installed-price surveys + regional references, updated July 1, 2026 — see our methodology.
What drives fence cost in Oregon
Western Oregon's constant moisture makes rot at the ground line the number-one fence failure — gravel-set or sleeved posts and ground-contact-rated wood are the difference between ten years and twenty-five. Local Western red cedar keeps the region's signature material affordable. The 12-inch frost line barely affects digging. Labor runs about 18 percent above the national average, driven by Portland. East of the Cascades the calculus flips: drier air, colder winters, deeper footings.
Estimate your fence in Oregon
$5k – $13k · $42 per linear foot (/lf)
Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.
Material takeoff
- Posts
- 30 ea
- Panels / sections
- 25 ea
- Concrete (80 lb bags)
- 44 bags
Cost breakdown
- Fence run
- $4k – $10k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $5k – $13k
- Model estimate
- $8,222
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (12 in) with a 2 ft minimum embed.
- Most Oregon towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Coastal wind exposure calls for sturdier posts and footings.
Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources
Frequently asked questions
- How much does a fence cost in Oregon?
- A typical 150 ft, 6 ft wood privacy fence in Oregon runs about $4k – $10k installed, with labor roughly 18% above the national average.
- How deep do fence posts go in Oregon?
- Oregon's frost line is about 12 in, so post holes are dug to roughly 2 ft to set below frost — deeper frost means more concrete per post.
- Do I need a permit for a fence in Oregon?
- Most Oregon towns require a permit for a new fence; front-yard height is commonly capped near 3–4 ft and rear/side near 6 ft, with setbacks and any HOA rules set locally. Coastal wind exposure calls for sturdier posts and footings.