Fence Cost Calculator / Texas
Fence Cost in Texas (2026)
Building a fence in Texas runs roughly 5% below the national average on installed labor, which we apply to the per-foot rate. With a frost line around 6 in, posts are set deeper (more concrete) than in warm-winter states. Last updated July 1, 2026.
A typical 150 ft wood privacy fence in Texas
6 ft wood, one walk gate, flat terrain, normal soil — a clean baseline before you customize.
Material takeoff
- Posts
- 24 ea
- Panels / sections
- 19 ea
- Concrete (80 lb bags)
- 35 bags
Cost breakdown
- Fence run
- $3k – $7k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $3k – $8k
- Most likely
- $5,052
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (6 in) with a 2 ft minimum embed.
- Permits vary by city; deed/HOA restrictions are common. Front-yard fences are often limited to ~4 ft.
Where these numbers come from: installed-price surveys + regional references, updated July 1, 2026 — see our methodology.
What drives fence cost in Texas
Expansive clay is the story across much of Texas: Blackland Prairie soils swell and shrink with the weather, so pros set posts deeper and wider than the shallow 6-inch frost line would suggest. Board-on-board cedar privacy fences are the default look in DFW and Austin suburbs, often on steel posts because wind and clay movement rack wooden ones. Labor runs a bit below the national average, and HOA covenants, not city permits, are the usual paperwork hurdle.
Estimate your fence in Texas
$4k – $10k · $34 per linear foot (/lf)
Material takeoff
- Posts
- 30 ea
- Panels / sections
- 25 ea
- Concrete (80 lb bags)
- 44 bags
Cost breakdown
- Fence run
- $4k – $10k
- walk gate
- $150 – $700
- Permit allowance
- $50 – $250
- Total
- $4k – $10k
- Most likely
- $6,620
- Assumes a closed rectangular run (4 corners, no open ends).
- Post holes sized to the local frost line (6 in) with a 2 ft minimum embed.
- Permits vary by city; deed/HOA restrictions are common. Front-yard fences are often limited to ~4 ft.
Data: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · industry surveys — see all sources
Frequently asked questions
- How much does a fence cost in Texas?
- A typical 150 ft, 6 ft wood privacy fence in Texas runs about $3k – $8k installed, with labor roughly 5% below the national average.
- How deep do fence posts go in Texas?
- Texas's frost line is about 6 in, so post holes are dug to roughly 2 ft to set below frost — deeper frost means more concrete per post.
- Do I need a permit for a fence in Texas?
- Permits vary by city; deed/HOA restrictions are common. Front-yard fences are often limited to ~4 ft.