Pool Cost Calculator / North Carolina
Inground Pool Cost Calculator in North Carolina (2026)
Start with a 400 sq ft pool in North Carolina, compare materials, then adjust the calculator to your project. The regional model factor is 95% of the national baseline for the area-and-depth portion of the shell price; it is not a measured local labor rate. Residential electricity is approximately 14¢/kWh in the EIA-based data through April 2026.
A 400 sq ft gunite pool in North Carolina
20 ft × 20 ft, 5 ft average depth, standard (flat) excavation, no add-ons. The calculator below starts with these same assumptions.
Not an all-in project quote. Decking, fencing, heating, covers and other add-ons are not selected. Permits, unusual site conditions, utility upgrades and yard restoration require separate confirmation with your contractor. The displayed range is a modeled ±15% band, not a statistical confidence interval or a survey of local bids.
Read the calculation methodology and pricing and energy source notes before comparing a contractor's scope with this estimate.
- Estimate for pre-qualification, not a quote; price varies by contractor, location, and season.
Last updated June 30, 2026
Gunite vs. fiberglass vs. vinyl in North Carolina
Same 400 sq ft pool, priced three ways with the same North Carolina regional model factor and flat excavation.
- Gunite (concrete)
- $41k – $55k
- Fiberglass
- $38k – $52k
- Vinyl liner
- $28k – $38k
Estimate your pool in North Carolina
Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources
North Carolina code and permit checks before you sign
North Carolina OSFM still identifies the 2018 North Carolina State Building Code as the current statewide code while the 2024 code moves toward full implementation. OSFM says the 2024 code may be used as an alternate method when requested under the current transition rules.
Permit and zoning details are enforced locally. Mecklenburg County, for example, requires approval and building permits for a residential pool and points owners to the state residential pool provisions. Confirm the code edition, pool barrier, electrical, zoning, septic, permit, and inspection scope with the authority for your project address before signing a final contract.
Official sources checked September 28, 2026: North Carolina OSFM — 2026 building code update; Mecklenburg County — Residential Pools; Mecklenburg County — Pool Code Questions.
Pool cost by size in North Carolina
| Size / water surface | Gunite | Fiberglass | Vinyl liner |
|---|---|---|---|
| 12 × 24 ft / 288 sq ft | $35k – $48k | $35k – $47k | $25k – $34k |
| 15 × 30 ft / 450 sq ft | $43k – $58k | $40k – $54k | $30k – $40k |
| 16 × 32 ft / 512 sq ft | $46k – $62k | $42k – $57k | $31k – $43k |
The regional model factor applies to the area-and-depth portion of the shell price, not to every line item. Site conditions and the selected contractor can change the result. A lower modeled price does not establish which material is best for your site.
What to include in a North Carolina pool quote
The figures above are a starting budget, not an all-in backyard project. Ask each contractor for the same written scope before comparing the total.
- Shell, equipment and installation scope
- Match dimensions, average depth, finish and specified equipment. Confirm what the installation allowance covers instead of treating the model as a specification.
- Site work and separate allowances
- Ask about access, soil and groundwater, spoil removal, utility work and restoration. The reference uses flat excavation; difficult ground is not priced individually.
- Extras and approvals
- Decking, fencing, heating, covers and other add-ons are excluded from these tables. Confirm permits, safety requirements and inspections with the authority for your address. This estimate does not price those approvals or certify compliance.
A separate annual running-cost budget in North Carolina
For a 400 sq ft chlorine pool with partial service, the maintenance model estimates about $1,720 per year without heating or $2,280 with the model's heating allowance. These are two scenarios, not the low and high ends of a quote or a confidence interval.
The North Carolina model uses a 10-month operating season as a planning assumption, not a forecast for your address. Confirm actual operating months and any opening, closing or repair charges separately. The heating allowance is not a temperature-specific heat-loss calculation.
Adjust the assumptions in the pool maintenance calculator and compare equipment with the pool heating calculator. Those tools have their own defaults; select your state and pool size there.
Already have a pool? Plan monthly maintenance and heating costs. Those calculators have separate defaults; select your location and size there. Or return to the national pool cost calculator.