Ballpark Lab

Siding Cost Calculator / New York

New York siding estimate

Siding Cost in New York (2026)

Re-siding a house in New York runs roughly 30% above the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-story vinyl re-side in New York

45 × 30 ft footprint (150 ft perimeter), 19 ft walls, gable roof, 12 windows, 2 doors, 1 garage door, no tear-off — a clean baseline before you customize.

$14k – $55k
Confidencehigh

Material takeoff

Siding to order
32 squares
Starter strip
150 lf
Housewrap
3,075 sq ft
Outside corner posts
76 lf
Vinyl boxes (2 squares/box)
17 boxes

Cost breakdown

vinyl siding (installed)
$10k – $39k
Permit allowance
$100 – $400
Total
$14k – $55k
Most likely
$32,065
  • Wall area = footprint perimeter × 19 ft grade-to-eave height; a 1.5:1 rectangle is assumed when only the perimeter is known.
  • 2 gable triangles estimated at a 6/12 pitch for the "gable" roof style.
  • Openings reduced at 75% of their area (trim and cuts eat part of the saving); waste factor 13%.
  • Most towns require a permit; historic districts add review. Freeze-thaw favors fiber cement and engineered wood.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives siding cost in New York

New York's freeze-thaw winters work siding hard — vinyl expands and contracts across a wide temperature swing, so seams and fastening technique (nailed loose, never tight) separate a good install from a wavy one. Upstate, vinyl is the value default; downstate and in historic districts, expect design review and higher-end materials. The blended labor rate runs about 30 percent above the national average, with the sharpest premiums near the city. Fiber cement and engineered wood are gaining as the durability upgrade.

Estimate your siding in New York

House details

This estimates wall area from your footprint — we adjust for stories, gables, windows and doors.

The long side of the house, in feet.

The short side, in feet.

Footprint perimeter: 150 ft (2 × (length + width))

Grade to eave, in feet — pre-filled from the story count.

Gable ends add sided triangles; hip and flat roofs don't.

Openings to subtract
Windows
12
Doors
2
Garage doors
1

Trim and cuts eat part of the saving — most estimators don't subtract 100%.

Estimated total
$13,762–$55,050
Vinyl · 32.3 squares
Low $14kMost likely ~$32,065High $55k

$14k – $55k · $10 per square foot (/sq ft) · 32.3 siding squares (1 square = 100 sq ft)

Confidencehigh

Material takeoff

Siding to order
32 squares
Starter strip
150 lf
Housewrap
3,075 sq ft
Outside corner posts
76 lf
Vinyl boxes (2 squares/box)
17 boxes

Cost breakdown

vinyl siding (installed)
$10k – $39k
Permit allowance
$100 – $400
Total
$14k – $55k
Most likely
$32,065
  • Wall area = footprint perimeter × 19 ft grade-to-eave height; a 1.5:1 rectangle is assumed when only the perimeter is known.
  • 2 gable triangles estimated at a 6/12 pitch for the "gable" roof style.
  • Openings reduced at 75% of their area (trim and cuts eat part of the saving); waste factor 13%.
  • Most towns require a permit; historic districts add review. Freeze-thaw favors fiber cement and engineered wood.

Compare materials

VinylSelected
$14k – $55k
Fiber cement
$23k – $64k
Engineered wood
$27k – $69k
Wood
$32k – $78k

The same house in each material — same size, openings, site, and state.

iBallpark estimate for planning, not a bid. Wall area is estimated from your footprint — a contractor will measure each wall. Excludes hidden rot, sheathing replacement, and structural repairs found at tear-off. Get 3 local quotes before signing.

Data: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · industry surveys — see all sources

Frequently asked questions

How much does siding cost in New York?
Re-siding a typical two-story house (45 × 30 ft footprint, about 32.3 squares) in New York runs about $14k – $55k in vinyl, with labor roughly 30% above the national average.
Is fiber cement worth it over vinyl in New York?
The same house in fiber cement runs about $23k – $64k versus $14k – $55k in vinyl. Fiber cement costs more up front but resists impact, fire, and fading better — often the better long-term buy in harsh climates.
Do I need a permit to re-side a house in New York?
Most towns require a permit; historic districts add review. Freeze-thaw favors fiber cement and engineered wood.

Siding costs in other states