Ballpark Lab

Driveway Cost Calculator / Colorado

Colorado driveway estimate

Driveway Cost in Colorado (2026)

Paving a driveway in Colorado runs roughly 10% above the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-car concrete driveway in Colorado

600 sq ft (20 × 30 ft), 4 in broom-finish slab, flat lot, new build — a clean baseline before you customize.

$4k – $10k
Confidencehigh

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$4k – $10k
Most likely
$6,765
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • City/county permits vary; grading and drainage review on sloped lots.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives driveway cost in Colorado

Colorado's high-altitude sun produces dozens of freeze-thaw swings each winter — warm afternoons and hard-freeze nights — which is tougher on flatwork than steady cold. Concrete dominates residential drives; success depends on air-entrained mix, control joints, and a compacted base to the 36-inch frost design depth. Sloped Front Range and foothills lots add grading and drainage review, and runoff control is often part of the permit. Labor prices about 10 percent above the national average, with mountain-town premiums well beyond that.

Estimate your driveway in Colorado

Driveway details

Street to garage, in feet.

A two-car drive is ~20 ft.

Thicker sections cost more but carry more load.

Anything but a new build adds removal and disposal.

Estimated total
$4,015–$10,175
Concrete · 4 in
Low $4kMost likely ~$6,765High $10k

$4k – $10k · $11 per square foot (/sq ft)

Confidencehigh

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$4k – $10k
Most likely
$6,765
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • City/county permits vary; grading and drainage review on sloped lots.

Compare materials

Asphalt
$3k – $8k
ConcreteSelected
$4k – $10k
Pavers
$7k – $20k
Gravel
$715 – $3k

Each material at its typical depth, same size, site, and state.

iBallpark estimate for planning, not a bid. Assumes a rectangular pad on a standard base; soft soils, drainage work, and curb-cut/apron rules are the usual extras. Get 3 local quotes before signing.

Data: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · industry surveys — see all sources

Frequently asked questions

How much does a driveway cost in Colorado?
A typical 600 sq ft (20 × 30 ft) two-car concrete driveway in Colorado runs about $4k – $10k installed, with labor roughly 10% above the national average.
Is asphalt cheaper than concrete in Colorado?
Yes, up front: the same 600 sq ft driveway in asphalt runs about $3k – $8k versus $4k – $10k in concrete — though concrete typically lasts longer with less resealing.
Do I need a permit for a driveway in Colorado?
City/county permits vary; grading and drainage review on sloped lots.

Driveway costs in other states