Ballpark Lab

Driveway Cost Calculator / Hawaii

Hawaii driveway estimate

Driveway Cost in Hawaii (2026)

Paving a driveway in Hawaii runs roughly 38% above the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-car concrete driveway in Hawaii

600 sq ft (20 × 30 ft), 4 in broom-finish slab, flat lot, new build — a clean baseline before you customize.

$5k – $13k
Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$5k – $13k
Model estimate
$8,487
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs Hawaii/municipal approval, and flatwork permits and HOA paving rules vary by town.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives driveway cost in Hawaii

Hawaii drives are overwhelmingly concrete: asphalt supply is limited, cement ships in, and everything carries freight — with labor nearly 40 percent above the national average on top. There's no frost design at all; the engineering is rain, especially on windward slopes where tropical downpours demand serious cross-drainage. Pavers suit the aesthetic and handle root movement from tropical landscaping. On sloped lots, grading and runoff control drive the permit conversation.

Estimate your driveway in Hawaii

Driveway details

Street to garage, in feet.

A two-car drive is ~20 ft.

Thicker sections cost more but carry more load.

Anything but a new build adds removal and disposal.

Estimated total
$5,037–$12,765
Concrete · 4 in
Low $5kMost likely ~$8,487High $13k

$5k – $13k · $14 per square foot (/sq ft)

Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$5k – $13k
Model estimate
$8,487
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs Hawaii/municipal approval, and flatwork permits and HOA paving rules vary by town.

Compare materials

Asphalt
$4k – $10k
ConcreteSelected
$5k – $13k
Pavers
$8k – $25k
Gravel
$897 – $3k

Each material at its typical depth, same size, site, and state.

iBallpark estimate for planning, not a bid. Assumes a rectangular pad on a standard base; soft soils, drainage work, and curb-cut/apron rules are the usual extras. Get 3 local quotes before signing.

Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources

Frequently asked questions

How much does a driveway cost in Hawaii?
A typical 600 sq ft (20 × 30 ft) two-car concrete driveway in Hawaii runs about $5k – $13k installed, with labor roughly 38% above the national average.
Is asphalt cheaper than concrete in Hawaii?
Yes, up front: the same 600 sq ft driveway in asphalt runs about $4k – $10k versus $5k – $13k in concrete — though concrete typically lasts longer with less resealing.
Do I need a permit for a driveway in Hawaii?
A new curb cut or apron in the public right-of-way needs Hawaii/municipal approval, and flatwork permits and HOA paving rules vary by town.

Driveway costs in other states