Ballpark Lab

Driveway Cost Calculator / New Mexico

New Mexico driveway estimate

Driveway Cost in New Mexico (2026)

Paving a driveway in New Mexico runs roughly 6% below the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-car concrete driveway in New Mexico

600 sq ft (20 × 30 ft), 4 in broom-finish slab, flat lot, new build — a clean baseline before you customize.

$3k – $9k
Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$3k – $9k
Model estimate
$5,781
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs New Mexico/municipal approval, and flatwork permits and HOA paving rules vary by town.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives driveway cost in New Mexico

New Mexico paving is desert engineering: intense sun oxidizes asphalt quickly, so concrete and gravel dominate residential drives. The 18-inch frost line asks for only a modest base, and native caliche often provides a naturally firm subgrade — a cost advantage unique to the region. The monsoon is the drainage test: brief, violent runoff wants crowned surfaces and defined channels. Labor runs about 6 percent below the national average, and rural permitting is minimal.

Estimate your driveway in New Mexico

Driveway details

Street to garage, in feet.

A two-car drive is ~20 ft.

Thicker sections cost more but carry more load.

Anything but a new build adds removal and disposal.

Estimated total
$3,431–$8,695
Concrete · 4 in
Low $3kMost likely ~$5,781High $9k

$3k – $9k · $10 per square foot (/sq ft)

Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$3k – $9k
Model estimate
$5,781
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs New Mexico/municipal approval, and flatwork permits and HOA paving rules vary by town.

Compare materials

Asphalt
$3k – $7k
ConcreteSelected
$3k – $9k
Pavers
$6k – $17k
Gravel
$611 – $2k

Each material at its typical depth, same size, site, and state.

iBallpark estimate for planning, not a bid. Assumes a rectangular pad on a standard base; soft soils, drainage work, and curb-cut/apron rules are the usual extras. Get 3 local quotes before signing.

Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources

Frequently asked questions

How much does a driveway cost in New Mexico?
A typical 600 sq ft (20 × 30 ft) two-car concrete driveway in New Mexico runs about $3k – $9k installed, with labor roughly 6% below the national average.
Is asphalt cheaper than concrete in New Mexico?
Yes, up front: the same 600 sq ft driveway in asphalt runs about $3k – $7k versus $3k – $9k in concrete — though concrete typically lasts longer with less resealing.
Do I need a permit for a driveway in New Mexico?
A new curb cut or apron in the public right-of-way needs New Mexico/municipal approval, and flatwork permits and HOA paving rules vary by town.

Driveway costs in other states