Ballpark Lab

Driveway Cost Calculator / New Hampshire

New Hampshire driveway estimate

Driveway Cost in New Hampshire (2026)

Paving a driveway in New Hampshire runs roughly 8% above the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-car concrete driveway in New Hampshire

600 sq ft (20 × 30 ft), 4 in broom-finish slab, flat lot, new build — a clean baseline before you customize.

$4k – $10k
Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$4k – $10k
Model estimate
$6,642
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs New Hampshire/municipal approval, and flatwork permits and HOA paving rules vary by town. A deeper compacted base helps resist frost heave here.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives driveway cost in New Hampshire

New Hampshire paving is granite-flavored: ledge excavation is the classic surprise, mud season sets the calendar, and the 48-inch frost line puts serious money into the gravel base. Asphalt dominates for the usual New England reasons — salt tolerance, frost flexibility, plow-season patching. Labor tracks around 8 percent above national norms, better than the Massachusetts rates many border contractors otherwise charge. Gravel drives remain standard on rural and lake properties.

Estimate your driveway in New Hampshire

Driveway details

Street to garage, in feet.

A two-car drive is ~20 ft.

Thicker sections cost more but carry more load.

Anything but a new build adds removal and disposal.

Estimated total
$3,942–$9,990
Concrete · 4 in
Low $4kMost likely ~$6,642High $10k

$4k – $10k · $11 per square foot (/sq ft)

Input completenesshigh

Based on the model's answered input checks, including defaults. This is not verified price accuracy or a statistical confidence level.

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$4k – $10k
Model estimate
$6,642
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • A new curb cut or apron in the public right-of-way needs New Hampshire/municipal approval, and flatwork permits and HOA paving rules vary by town. A deeper compacted base helps resist frost heave here.

Compare materials

Asphalt
$3k – $8k
ConcreteSelected
$4k – $10k
Pavers
$7k – $20k
Gravel
$702 – $3k

Each material at its typical depth, same size, site, and state.

iBallpark estimate for planning, not a bid. Assumes a rectangular pad on a standard base; soft soils, drainage work, and curb-cut/apron rules are the usual extras. Get 3 local quotes before signing.

Site data & assumptions: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · Ballpark Lab model assumptions — see all sources

Frequently asked questions

How much does a driveway cost in New Hampshire?
A typical 600 sq ft (20 × 30 ft) two-car concrete driveway in New Hampshire runs about $4k – $10k installed, with labor roughly 8% above the national average.
Is asphalt cheaper than concrete in New Hampshire?
Yes, up front: the same 600 sq ft driveway in asphalt runs about $3k – $8k versus $4k – $10k in concrete — though concrete typically lasts longer with less resealing.
Do I need a permit for a driveway in New Hampshire?
A new curb cut or apron in the public right-of-way needs New Hampshire/municipal approval, and flatwork permits and HOA paving rules vary by town. A deeper compacted base helps resist frost heave here.

Driveway costs in other states