Ballpark Lab

Driveway Cost Calculator / Massachusetts

Massachusetts driveway estimate

Driveway Cost in Massachusetts (2026)

Paving a driveway in Massachusetts runs roughly 32% above the national average on installed labor, which we apply to the per-square-foot rate for every material. Last updated July 6, 2026.

A typical two-car concrete driveway in Massachusetts

600 sq ft (20 × 30 ft), 4 in broom-finish slab, flat lot, new build — a clean baseline before you customize.

$5k – $12k
Confidencehigh

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$5k – $12k
Most likely
$8,118
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • Most towns permit new driveways; curb cuts need local DPW approval.

Where these numbers come from: installed-price surveys + regional references, updated July 6, 2026 — see our methodology.

What drives driveway cost in Massachusetts

Massachusetts driveways are asphalt by default — New England winters, a 48-inch frost line, and heavy salting punish rigid slabs, while blacktop flexes and patches after plow season. The deep frost line means the compacted gravel base is a big share of the job, and labor costs running roughly a third higher than the national norm make this one of the priciest states to pave. Concrete and pavers appear mostly on high-end projects. Curb cuts go through the local DPW.

Estimate your driveway in Massachusetts

Driveway details

Street to garage, in feet.

A two-car drive is ~20 ft.

Thicker sections cost more but carry more load.

Anything but a new build adds removal and disposal.

Estimated total
$4,818–$12,210
Concrete · 4 in
Low $5kMost likely ~$8,118High $12k

$5k – $12k · $14 per square foot (/sq ft)

Confidencehigh

Material takeoff

Concrete (with waste)
8 yd³
Form boards
100 lf
Gravel base course
10 tons

Cost breakdown

concrete surface (installed)
$4k – $9k
Permit allowance
$50 – $250
Total
$5k – $12k
Most likely
$8,118
  • Rate assumes a 4 in concrete section on a standard base; your 4 in depth scales the material share.
  • Contractors typically cut control joints every 8–12 ft on concrete, depending on slab shape and local practice.
  • Most towns permit new driveways; curb cuts need local DPW approval.

Compare materials

Asphalt
$4k – $10k
ConcreteSelected
$5k – $12k
Pavers
$8k – $24k
Gravel
$858 – $3k

Each material at its typical depth, same size, site, and state.

iBallpark estimate for planning, not a bid. Assumes a rectangular pad on a standard base; soft soils, drainage work, and curb-cut/apron rules are the usual extras. Get 3 local quotes before signing.

Data: U.S. EIA · OpenEI URDB · Google Solar · NREL PVWatts · DSIRE · IRS · ENERGY STAR · industry surveys — see all sources

Frequently asked questions

How much does a driveway cost in Massachusetts?
A typical 600 sq ft (20 × 30 ft) two-car concrete driveway in Massachusetts runs about $5k – $12k installed, with labor roughly 32% above the national average.
Is asphalt cheaper than concrete in Massachusetts?
Yes, up front: the same 600 sq ft driveway in asphalt runs about $4k – $10k versus $5k – $12k in concrete — though concrete typically lasts longer with less resealing.
Do I need a permit for a driveway in Massachusetts?
Most towns permit new driveways; curb cuts need local DPW approval.

Driveway costs in other states